Dedication | Consumer Product Reviews

The magic weight loss formula is a mixture of diet, exercise, and motivation. It’s like a cocktail, of sorts, a potion that when mixed together in the right way may make weight closely disappear. It may shrink that annoying waistline once and for all. It may shrink your belly, and firm up your thighs.

It may give you more energy than you’ve had in years. It may make you a social butterfly, and the life of the party. Okay, perhaps that’s a stretch, unless you already are a social butterfly. But it will carry out a miraculous change. It may do all of this, but there is a hitch.

The magic weight loss formula takes crusade on your part. It takes a master decision. It takes a dedication to action. Nothing in life is free, as they say. If you’re prepared to give effort, your return may be ten-fold, or perchance more.

If you create, and then hold to a future vision of a newer, thinner version of yourself, your return for your attempts may end on the side of the angels. You may very well be unrecognizable to your friends and business colleagues.

If you are prepared, then step forward and hug the magic weight loss formula.

The magic weight loss formula comprises of three parts:

Diet: You don’t have to alter your eating world, as the “experts” might have you believe. You only need to scale back the bad foods (mostly the fast feed and late night snacks) as you progress.

For example, for your lunch hour start out preparing meals at home and bringing them to work. That’s a start. From there, eat littler portions of the bad foods, until you may reduce them completely, except for one cheat day a week.

Exercise: We’re not lazy people, there’s just so a lot of things to do. If you may make time for brushing your teeth, you may make time for exercise. Get up a half hour earlier each morning and do 20 minutes of exercise.

It may be any exercise, including using that info-product you purchased on late night TV (Who didn’t?). It doesn’t have to be a struggle. It just has to get done. Remember, I said commitment? We aren’t attempting to move a mountain.

Motivation: This is where you make or break your success. If you may discipline yourself to keep an inspirational book of a good deal of kind by your bedside and do not forget to read a chapter a night, you will stay on track. If you cannot, chances are beauteous good you won’t stay on course.

Yes, it takes motivation to, um, keep yourself motivated. That’s pure sarcasm for you.

Magic is slight of hand. You thought you saw something, but it was only an illusion. The magic weight loss formula is real. It has real power. It has true staying power. The only variable is you.

Make a personal commitment to yourself and begin, right where you are, right now.

Keep Weight Off With The Power Formula

The new AirForce 250CI plasma cutter with built-in air compressor features a new lightweight inverter design that is both lightweight and powerful. Built-in compressor for total portability and low system cost. Cuts mild steel up to 1/4in. thick using frequent household current. New HP-25 torch is more comfortable, effective and economical. U.S.A. Cutting Thickness (in.): Up to 1/4, Volts: 115VAC, Amps: 20, Duty Cycle: 35% at 12 Amps, 110 Volts DC, Pilot Arc: Yes, Plasma Gas Flow/Pressure: Preset with built-in compressor, Clamp Cable Length (ft.): 16.4, Power Cord (ft.): 7, Cart: No, Dimensions L x W x H (in.): 7 1/2 x 13 x 10

The Airforce 250ci uses an electrical arc and compressed air to cut steel, Aluminum and other conductive metals. Designed to cut up to 1/4-inch Steel by using a usual household current. A built-in air compressor and lightweight inverter power supply make this Plasma Cutter the most convenient, completely portable cutting scheme available. The Air strength 250ci excels at cutting sheet metal and 1/8 in mild steel. Weight of Machine is 27-pounds.

Most helpful customer reviews

10 of 10 people found the following review helpful.
Hobart has another winner.
By D. Broncheau
Perfect little machine for the home hobbiest. I bought this machine for sheet metal work and the ocassional 1/4″ chunk. Cuts like butter through thin steel, takes a little more time on the 1/4″ stuff. But its alot cheaper to operate on sheet metal and mild steel than oxy-acetylene. Best feature of this unit is not having to adjust a single thing, no air pressure, no amperage adjustment. Just pull the trigger and cut away.

4 of 4 people found the following review helpful.
Amateur Car Restorer
By Brian R
I bought this Plasma cutter for cutting sheet metal and various Rusty parts off my 76 Trans Am and I must say for the size of this little box and the cost, I’m very impressed. The unit is like they say plug in and play. I found it very easy to fit into my Hobart upright cart along with my Hobart Handler 140 (also an awesome welder) so if you’re concerned about size, don’t be, it’s about the size of 2 six packs. Key features I like about it are that I don’t need to use my air compressor on it, it has one built in. This way I don’t have to adjust the regulator or any. Also, it only throws sparks about 1-2ft, I’ve heard horror stories of Plasma cutters throwing sparks for 4-6ft. I’m working in a small one car garage and I don’t like having to worry about fires and such when working. Now as for cutting depth. The book states it can do 1/4in thick steel. I believe if you have perfect conditions it can do this with a pass or two. I have found in my own experience that it will at least cut 1/8th to 3/16th. (I had to cut off my rear frame off my car and it worked great.) And as for 20-22gauge steel, it’ll cut through that like butter.

Now the cons, he ground cable isn’t very flexible. It seems almost as if it were solid wire instead of stranded. I’m comparing this to my welder’s ground cable and it is much more flexible. Another con is that I’m not very good at it so it keeps turning on and off and when it turns off you have to wait for the compressor to refill (3-5sec) before you can start again. Not a huge con but annoying if impatience is a character trait. It does however run rather quiet, I can talk over the sound of the compressor. Other than that I can’t really thing of other draw backs. They do come with a 3 year warranty from Hobart, I called hobart up and I talked to one of their repair technitions and he said he barely ever gets plasma cutters in, they mostly get welders that have been on the job site for 10-15 years. So I do agree that hobart is an AWESOME BRAND. So I my point with that is don’t be afraid to purchase one used for a couple bucks less. It’s worth it! I guess that about wraps it up.

Final Notes: I would recommend this to a friend for medium to light duty cutting. I would not recommend this to a daily use shop. I would suggest a size a bigger than this.

Biggest Con: Ground Cable flexibility
Biggest Pro: Aircompressor built in and uses 115v 20amp circuit.

7 of 9 people found the following review helpful.
Low Power – Useless Piece of Junk
By Tim Daycounter
I was greatly disapointed with this. I had difficulty cutting even 14 gauge steel. I had to go extreemly slow, and got a very sloppy cut, because the power was so slow. It came with a extreemly cheap tip guide, made of a piece of bended wire. This kept rotating as it passed along my straight edge, causing further frustration. [...] I guess you just expect more.